[Chat] Radiators

[Eric Dymond]

I think it's mostly personal preference.  If it's what you have, it's
expensive to switch to something else, but given its inherent inefficiency
and  general difficulty finding repair people, most people are choosing
steam over hot water or forced air.
On Thu, Jan 19, 2012 at 11:24 PM, Kathleen Wilsbach <kwilsbach8 at gmail.com>wrote:

> I have to disagree with Eric.  I love our steam heat.  When we had ducts
> put
> in for the central air, we left the radiators right where they were.
>  Although
> the air in our house is still somewhat dry during the winter, I'll take
> steam
> over forced air any day.  SSSSSSSSSS!
>
> I do agree that it's a good idea to hire an expert to deal with problems.
> When we've had trouble with our radiators, we've had very good service
> from Saffer plumbing.  Faulty valves do need to be replaced if they're
> not working right.  Also if the valve near the floor is leaking, it might
> need some new lamp wick which works as a sort of gasket.
> Sadly we had a leaking radiator that had to be
> replaced.  Of course, you can't buy new but Saffer tries to keep a stock
> of used ones on hand for just such situations.  When we first bought our
> house, David Saffer was very helpful in explaining the ins and outs of
> the steam heating system and giving it an initial tuneup.
>
> Kathleen Wilsbach
>
> On Thu, Jan 19, 2012 at 6:32 PM, Eric Dymond <ericdymond at gmail.com> wrote:
>
> > In short, it's sort of voodoo and it's best to hire someone to do it,
> rather
> > than doing it yourself. I haven't really found anyone that I'd recommend.
> > It's really a terrible way to heat a house.
> >
> >
> >
> >
> > On Thu, Jan 19, 2012 at 6:18 PM, Jeanne Knight <jeanneknight6 at msn.com>
> > wrote:
> >>
> >> Is it steam or hotwater?
> >>
> >> If hotwater, get a radiator key from the hardware store to turn the
> >> valve.  It costs very little.   Bleed the radiator of the air that has
> >> accumulated.  Have a bowl with you to catch the water that will come out
> >> after the air is drained but before you retighten the valve.  Start
> with the
> >> one furthest from the furnace.
> >>
> >>
> >> Jeanne Knight
> >> 2513 Guilford Avenue
> >> Baltimore, MD 21218
> >> 410 366-2849
> >> 410 977-8851 cell
> >>
> >>
> >> ________________________________
> >> Date: Thu, 19 Jan 2012 17:29:02 -0500
> >> From: casey.e.miller at gmail.com
> >> To: chat at charlesvillage.info
> >> Subject: [Chat] Radiators
> >>
> >>
> >> Does anyone have experience with steam radiators?  I know they're
> supposed
> >> to make some noise, but I've got a few that bubble, gurgle, and whistle
> all
> >> night long and I'd rather not be forced to make the choice between being
> >> warm and getting a good night's sleep.  I've heard that the system may
> need
> >> to be balanced, but I'm a complete novice to this stuff.
> >>
> >> Thanks,
> >>
> >> Casey
> >>
> >> _______________________________________________ Chat mailing list
> >> Chat at charlesvillage.info
> >> http://charlesvillage.info/mailman/listinfo/chat_charlesvillage.info
> >> archive: http://www.mail-archive.com/chat@charlesvillage.info/
> >>
> >> _______________________________________________
> >> Chat mailing list
> >> Chat at charlesvillage.info
> >> http://charlesvillage.info/mailman/listinfo/chat_charlesvillage.info
> >> archive: http://www.mail-archive.com/chat@charlesvillage.info/
> >
> >
> >
> > _______________________________________________
> > Chat mailing list
> > Chat at charlesvillage.info
> > http://charlesvillage.info/mailman/listinfo/chat_charlesvillage.info
> > archive: http://www.mail-archive.com/chat@charlesvillage.info/
>
> _______________________________________________
> Chat mailing list
> Chat at charlesvillage.info
> http://charlesvillage.info/mailman/listinfo/chat_charlesvillage.info
> archive: http://www.mail-archive.com/chat@charlesvillage.info/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://charlesvillage.info/pipermail/chat_charlesvillage.info/attachments/20120120/622b06ba/attachment.html>